About LuxMed Pass Box Controller
Pass Box is used for material transfer from one Clean room to another clean room. It consists of a rectangular box with two doors. The two doors are interlocked such that both doors cannot be open at the same time, to prevent pressure losses and cross contamination. Lux Lighting Pass Box Controller achieves this by ensuring that before Door 1 of a Pass Box is opened, the Door 2 is closed. There are two LCD Display Cum Operator Panels (LCD Display Panels), one each to be mounted above each door. The panel has a 20x 4 Jumbo Blue backlit LCD, information and status display for UV Time Totalizer, Door Status, etc. The LCD is also used during configuration of pass box. Pass box Controller also has provision to connect UV lamp, CF lamp and FAN.
* Advanced controller based design.
* Door status indication on LCD display.
* Opposite door status indication by LED.
* Password protected.
* Operates electromagnetic locks with inbuilt door open sensor for door feedback.
* User defined company name. ( pre-dispatch setting)
* Adjustable delay time between closing of Door 1 and opening of Door 2 (and vice versa).
* Status indication on LCD display panel: GO, WAIT, DOOR OPEN, CLOSE DOOR.
* Buzzer output if door is kept open more than specified time.
* 4 special multi function keys ESC, UP, Down & Menu in program mode and use to operate CFL, UV, FAN if Manual/Auto manual mode is selected.
*UV LAMP ON if both doors closed.
* UV life calculation in hours and minutes.
* Buzzer alarm when 10% life of total life remaining (factory set).
* Provision of FAN trip with LED indication.
* CF LAMP ON when any door is open
* LED indication for CFL, UV & FAN on LCD display panel.
*Provision of FAN trip with LED indication.
*Buzzer alarm for High DP & Low DP